Polycom SoundPoint IP 650 User Manual page 23

• A single Line Key per line
• Multiple Line Keys per line
If your phone is configured with multiple call appearances, refer to
Multiple Call Appearances
call.
You can ignore incoming calls by pressing the Reject soft key (for private lines), the
Note
Silence soft key (for shared lines), or the Do Not Disturb key. Do Not Disturb mode
stays active when the call ends and remains active until you press the Do Not
Disturb key again.
You can forward incoming calls by pressing the Forward soft key. For more
information, refer to
When your phone is configured with a silent ring, press the ringing Line key or the
Answer soft key to answer the call. By default, if your handset is off-hook, the call is
routed to it. If your handset is on-hook, the call is routed to the speaker.
Answering When Not in Another Call
In all cases, the active call will appear on the graphic display showing call
duration and destination.
To answer a call using the handset:
Pick up the handset.
>>
on page 3-1 for instructions on how to answer a
Dynamic Forwarding on page 2-20.
Using the Basic Features of Your Phone
Using
2 - 5