Programmed Play - Sharp XL-E2180H Operation Manual

Programmed play

You can choose up to 32 selections for playback in the order you like.
1
While in the stop mode, press the
MEMORY button on the remote
control to enter the programming
save mode.
2
Press the direct search buttons
on the remote control to select
the desired track.
You can also select a track by pressing the
3
Press the MEMORY button to
save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
5
Press the (CD ) button.
The total number in memory will
appear.
6
Press the / button to start playback.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the
remote control while the "MEMORY" indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY"
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the programme:
Selected track number
If a programme has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
or button.
tracks will be stored after the last track of the previous program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
MP3/WMA Folder programmed:
Only tracks in the same folder can be select. Select which folder to
be programmed before entering program mode. (refer page 17 to
select folder)
Notes:
or button.
When a disc is ejected, the program is automatically cancelled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the program operation, random play is not possible.
XL-E2180H
XL-E2580H
ENGLISH
E-16