Specifications - Sharp XL-E2180H Operation Manual

Specifications

XL-E2180H
XL-E2580H
ENGLISH
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product im-
provement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General (XL-E2180H)
Power source
Power
consumption
Dimensions
Weight
General (XL-E2580H)
Power source
Power
consumption
Dimensions
Weight
( * )This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode. Refer to page 8 to
cancel the demonstration mode.
E-39
AC 220 - 240 V ~ 50 Hz
Power on: 40 W
Power stand-by: 0.6 W(*)
Width: 180 mm (7-1/6")
Height: 260 mm (10-2/8")
Depth: 273 mm (10-6/8")
4.0 kg (8.8 lbs.)
AC 220 - 240 V ~ 50 Hz
Power on: 55 W
Power stand-by: 0.6 W(*)
Width: 180 mm (7-1/6")
Height: 260 mm (10-2/8")
Depth: 273 mm (10-6/8")
4.4 kg (9.7 lbs.)
Amplifier (XL-E2180H)
Output power PMPO: 128 W
MPO: 64 W (32 W + 32 W) (10% T.H.D.)
RMS: 64 W (32 W + 32 W) (10% T.H.D.)
RMS: 40 W (20 W + 20 W) (1% T.H.D.)
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
150 mV/10 k ohms at 70 Hz
Input terminals Audio In (audio signal):
250 mV/47 k ohms
Amplifier (XL-E2580H)
Output power PMPO: 320 W
MPO: 160 W (80 W + 80 W) (10% T.H.D.)
RMS: 160 W (80 W + 80 W) (10% T.H.D.)
RMS: 100 W (50 W + 50 W) (1% T.H.D.)
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
150 mV/10 k ohms at 70 Hz
Input terminals Audio In (audio signal):
250 mV/47 k ohms