Recording On Usb Memory Device - Sharp XL-E2180H Operation Manual

Recording on USB Memory device

This system can record a standard CD, CD-R/RW in the CD format or
CD-R/RW with MP3 files, TUNER function to the USB device.
CD to USB recording
There are four kinds of recording from CD to USB.
1. One File Recording (for CD) or One File Copy (for MP3 disc).
2. One Disc Recording (for CD) or One Disc Copy (for MP3 disc).
3. Programme Recording.
4. One Folder Copy (for MP3 disc only).
Select the bitrate before starting recording.
Press the MODE button and "BIT RATE" will be displayed and then
press ENTER button.
This bitrate selection is valid for CD, TUNER and AUDIO IN function only.
Within 10 seconds, press the
bitrate, and press the ENTER button.
[128 kbps]
[192 kbps]
[96 kbps]
One File Recording (for CD) or One File Copy (for MP3 disc)
1
Perform steps 1 - 5 in "Listening to a CD or MP3/WMA disc" section
on page 13.
2
Press or button to select the desired file to be recorded.
3
Press the RECORD button to start USB recording at the selected track.
"REC START" will be displayed for a few seconds and recording will start
after the USB device has been initialised.
4
During file recording, the display will show normal CD playback but
during file copy process for MP3 disc, "COPY" will be displayed.
[CD]
[MP3]
or button to select the desired
5
After the selected song finishes playing, the unit will stop
playback and recording process automatically and
"WRITING USB" will be displayed for a few seconds.
Disc Recording (for CD) or Disc Copy (for MP3 disc)
1
Perform steps 1 - 5 in "Listening to a CD or MP3/WMA disc"
section on page 13.
2
Whilst in the stop mode, press the RECORD button to start
USB recording.
"REC START" will be displayed for a few seconds and
recording will start after the USB device has been initialised.
3
During disc recording, the display will show normal CD
playback but during disc copy process for MP3 disc,
"COPY" will be displayed.
4
After the last track of the disc is played, the unit will stop
playback and recording process automatically, and
"WRITING USB" will be displayed for a few seconds.
Programme Recording
1
Perform steps 1 - 6 in "Programmed play" section on page 16.
2
Whilst in the stop mode, press the RECORD button to start USB
recording.
"REC START" will be displayed for a few seconds and recording will start
after the USB device has been initialised.
3
During recording process, the display will show normal CD
programme playback.
4
After the last programme track is played, the unit will stop playback
and recording process automatically, and "WRITING USB" will be
displayed for a few seconds.
XL-E2180H
XL-E2580H
ENGLISH
E-22