Light Bulbs; Stainless Steel Surfaces - GE Monogram ZV750 Owner's Manual

Light bulbs

Stainless
steel
surfaces
To change the light bulbs:
1. Remove the trim ring by turning it
counterclockwise.
2. Grasp the bulb on the edges and pull it
straight out.
3. Replace with the same size bulb.
These 12 volt, 20 watt halogen bulbs are
available at specialty lighting stores. Ask for GE
bulb or equivalent: Q20MR16/C/CG40–BAB.
Do not use a steel-wool pad; it will scratch
the surface.
To clean the stainless steel surface, use a hot,
damp cloth with a mild detergent suitable
for stainless steel surfaces. Use a clean, hot,
damp cloth to remove soap. Dry with a dry,
clean cloth.
If food soil remains, try a general kitchen
cleaner, such as Fantastik
®
or Formula 409 .
For hard-to-clean soil, use a standard stainless
steel cleaner, such as Bon-Ami
® , Simple Green ® ,
® or Cameo ® .
Care and Cleaning
Stainless Steel Hood
Apply cleaner with a damp sponge. Use a clean,
hot, damp cloth to remove cleaner. Dry with a
dry, clean cloth. Always scrub lightly in the
direction of the grain.
After cleaning, use a stainless steel polish, such
as Stainless Steel Magic ® , Revere Copper and
Stainless Steel Cleaner ® , or Wenol All Purpose
Metal Polish ® . Follow the product instructions
for cleaning the stainless steel surface.
7