Glass Canopy; Light Bulbs; Stainless Steel Hood Surfaces - GE Monogram ZV900 Owner's Manual

Care and Cleaning
Glass Canopy Hood
Glass
canopbt
Clean with a damp, soapg cloth and drg with a
clean cloth. A glass cleaner mag also be used.
Stainless
steel hood
surfaces
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm
sudsg water or a stainless steel cleaner or polish.
Alwags wipe the surface in the direction of the
grain. Follow the cleaner instructions for cleaning
the stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest gou, please call our toll-free
number:
National Parts Center 800.626.2002
monogram.corn
Light bulbs To change the light bulbs:
1. Remove the inner lamp lens cover bg inserting a
small flat blade screwdriver into each of the three
slots and gentlg prging it free.
NOTE:Do not remove the outer trim ring (lamp
assemblg).
2. Grasp the bulb and pull it straight out.
3. Replace with the same wattage, tgpe and size
bulb. Wear Gloves. Do not touch bulb with gout
bare fingers.
These 12 volt, 20 watt halogen bulbs with a G4
base are available at specialtg lighting stores and
home building centers.
NOTE:If WRONGWATTBULBappears in the
displag, the wrong kind of replacement bulb has
been used. Replace with the same wattage, tgpe
and size bulb as the one removed.
4. Replace inner cover bg inserting the three
retaining tabs into the three slots and pressing
them firmlg in place.
_0
remove the inner lamp lens cover.
Bulb
Outer trim ring
(lamp assembly)
Do not remove
I I I
Removable inner
lamp lens cover
NOTE: Make sure the tabs are inserted into the slots.