Table of Contents
Advertisement
2.2 Basic specifications
No
1
Printing
2
Character specs
3
Emulation
4
Print mode
5
Logo store
6
Barcode
7
Interface
8
Receive buffer
9
Roll paper loading
10
Paper
Items
1. Print method
2. Total dots/line
3. Dot density
4. Print width
5. Print speed (MAX.)*
Conditions:
6. Print digits
Font A (12 x 24)
Font B (9 x 17)
7. Space btw characters
Font A (12 x 24)
Font B (9 x 17)
8. Space between lines
Font A (12 x 24)
Font B (9 x 17)
9. Line feed pitch
1. Character size
Font A (12 x 24)
Font B (9 x 17)
2. Character
ASCII
Extended graphics
International
Download register
3. Character type
Register Logo in flash ROM
Serial
1. Loading method
2. Near end sensor
3. Sensor position
1. Paper width
2. Maximum diameter
3. Core diameter
4. Recommended papers
3
Specifications
Line thermal dot
432 dots
8 dots/mm (203dpi)
54mm
85mm/sec.
ASCII full digits print. 25°.
Excluding comm. time.
36 digits
48 digits
Can be set by commands
0~4mm to the right
0~4mm to the right
Can be set by commands
0~28.875mm
0~29.750mm
0.125mm
1.50 x 3.00mm W x H
1.125 x 2.125mm W x H
95 characters
128 characters
37 characters
95 characters
Horizontal double, Vertical double
Quadruple, Bold, Double strike,
Inverted, 90°clockwise rotation,
Underline
In accordance to ESC/POS
ANK mode, Bit image mode,
Barcode mode
64K bytes x 3
UPC-A, UPC-E, EAN (JAN-13),
EAN (JAN-8), CODE39, ITF,
CODABAR, CODE128
In accordance to RS232C
Approx. 10K bytes
Drop-in
Sense with reflection
Approx. Ø24+-1 (Note1)
58 +0/-1mm
Ø84mm
Inner Ø12mm
Outer Ø18mm
Nippon Seishi TF50KS-E2D
OhjiSeishiPD160R-N, PD152R
Mitsubishi AFP235
Advertisement
Table of Contents
