Table of Contents
Advertisement
30) Select of HRI character style :<<GS f n>>
Code
Description
31) Assign peripheral devices
Code
Description
Bit
0
1
2
3
4
5
6
7
1) When journal printer is not assigned by b0=1, all data from host PC will be
removed.
2) When receipt printer is assigned by b0=1, all data from host PC will be
internally treated by journal printer.
3) The default value of n is [01] h.
32) Print position alignment
Code
Description : Aligns all data, excluding NV bit image, on a line to the assigned
Explanation : n values assign following justification.
This command is only valid when it is input at the head of a line.
The default value of n is [00] h.
: [1D] h + [66] h + n
: Selects HRI character style in printing barcode.
n has the following meaning.
n(hex)
00
Font A
01
Font B
Default value of n is [00] h.
:<< ESC = n >>
: [1B] h + [3D] h + n
: Data from host PC assigns valid device.
n has the following meaning.
Peripheral device
journal printer
not defined
not defined
not defined
not defined
not defined
not defined
not defined
:<< ESC a n >>
: [1B] h + [61] h + n
position.
n(hex)
00
left
01
center
02
right
* [00≤n≤01] h
Style
* [01≤n≤03 ] h
Values
0
reset
* [00≤n≤02] h
Position
25
1
set
Advertisement
Table of Contents
