Table of Contents
Advertisement
26) Barcode print
Code
Description : Selects barcode symbology and prints barcode.
*When the number of printing characters is fixed, make sure the that number of
characters should correspond to that of being printed.
*If horizontal data exceed one line, the exceeded data cannot be printed.
27) Barcode width size select
Code
Description
28) Barcode height select
Code
Description
Explanation : "n" shows the vertical dot number
29) Select of HRI character print position
Code
Description
:<< GS k n Dn NUL>>
: [ 1D] h + [ 6B ] h + n + Dn + [ 00 ] h
Next print start position is the head of a line.
Following is the barcode symbology
n(hex)
barcode symbology
00
UPC-A
01
UPC-E
02
JAN-13 (EAN-13)
03
JAN-8 (EAN-8)
04
CODE39
05
ITF
06
CODABAR (NW-7)
07
CODE128
:<< GS w n >>
: [1D] h + [77] h + n
: Selects width of barcode
The default value of n is [03] h.
:<< GS h n >>
: [1D] h + [68] h + n
: Assigns barcode height by dots.
*The default value of n is [A2] h, or 162 dots.
*Assign "n" value so that it matches to the barcode reader
specification for readable area.
:<< GS H n >>
: [1D] h + [48] h + n
: selects HRI character print position in printing barcode.
n has the following meaning.
n(hex)
00
no printing
01
above barcode
02
below barcode
03
above & below barcode
HRI characters are printed in the characters selected by [HRI
character style select].
Default value of n is [00] h.
* [02≤n≤04] h
* [01≤ n ≤FF] h
* [00≤n≤03] h
print position
24
* [00≤n≤07] h
Advertisement
Table of Contents
