Star Micronics NP-255 Product Specifications page 20

2 inch journal printer
Table of Contents

Advertisement

5) Overall print mode setting: <<ESC ! n>>
Code
Description
Bit
0
1
2
3
4
5
6
7
If double height and double width are set at the same time quadruple character will be
formed.
All of the printed characters will be underlined except for the 90° rotated characters and
spaces created by horizontal tab.
Underline width is determined by the value set in [Underline set/reset] section.
The default value is "1".
Different sizes of character mixed such as double width and normal size can be printed.
The default value of "n" is [00]h.
6) Down load characters set/reset : <<ESC % n>>
Code
Definition
Explanation
7) Definition of download character:
Code
Definition of download character( such as alpha numeric).
1. "s" indicates a number of bytes in a vertical direction and "a" is a number of dots
in horizontal direction.
2. "n" indicates the start character code, and "m" means the end character code. If
only 1 character should be defined, then n = m.
3. Definable characters are from <20>h to <7E>h in ASCII code (95 characters).
4. "Dn" indicates the data to be defined. It indicates the "a" dots pattern from the left.
Remaining area on the right of a character is filled with spaces.
5. Once a download character is defined, it remains valid until the download
character is redefined, printer is initialized, reset signal is input, or the power is
turned off.
: [1B] h + [21] h + n
: Sets print mode. "n" has following meanings
Function
Character font
Undefined
Undefined
Bold
Double height
Double width
Undefined
Underline
: [1B] h + [25] h + n
: Setting or resetting the characters to be downloaded.
: Only LSB (b0) is valid for "n" value. LSB (b0) has the following
meanings.
b0
Function
0
download character reset
1
download character set
Default value is "n" = [00]h
: [1B ] h + [26] h + s + n + m + a + Dn
* [00≤n≤FF] h
Values
0
Font A
Reset
Reset
Reset
Reset
* [00≤n≤FF]h
<< ESC & s n m a Dn>>
* [s = 03 ] h
* [20≤n≤7E ] h
* [20≤m≤7E ] h
* font A [ 01≤a≤0C ] h
* font B [ 01≤a≤09] h
16
1
Font B
Set
Set
Set
Set

Advertisement

Table of Contents
loading

Table of Contents