Table of Contents
Advertisement
11Mbps Wireless Ethernet Adapter User's Manual
2.Hardware Installation
Physical Details
Rear Panel
INIT Button
LAN Cable
Selection Switch
LAN Connection
Power Input
INIT Button
LAN Cable
Selection Switch
Power Input
LAN Connection
"INIT" mean "Initiation". While pressing the button, the adapter will
reboot and reset current settings to factory default settings. The left
indicator "DIAG" on adapter will be off and then begin blinking.
Then this initiation action will be completed when the indicator
" DIAG" is always green instead of blinking.
X
Crossover: the RJ-45 port Tx and Rx lines are
reversed. Use this setting when you use the supplied
straight cable connected to PC. It is also the factory
default setting.
II
Straight: the RJ-45 port Tx and Rx lines are normal.
Use this setting when you have the supplied straight
cable connected to Hub/switch
Only use the power adapter supplied with the Ethernet adapter
Use standard Ethernet cable (RJ-45 connector) to connect your
PC, hub/switch or broadband router/modem to this port.
7
Advertisement
Table of Contents
