Table of Contents
Advertisement
1.3 Hardware Installation
This sections shows you how to install your N220.
Locate an available USB port on the computer.
1
Remove the protective cap to expose the USB connector. Insert the N220 into an
2
available USB port on the computer.
The N220's LED (light) turns on if it is properly inserted.
Note: Never bend, twist or force the N220 into the port. If there is not enough space to
attach the N220, use the included USB cable.
1.4 Software Installation
This section shows you how to install the Mac OS X version of the ZyXEL Utility.
For detailed information on using it, see
1.4.1 Minimum System Requirements
In order to install the ZyXEL Utility for Mac OS X, your computer must meet the
following minimum system requirements:
• 20 MB of free hard drive space
• 128 MB RAM
• Mac OS X 10.3 and higher
N220 User's Guide
Chapter 1 Getting Started
Chapter 3 on page
33.
15
Advertisement
Table of Contents
