Installing A Module - McAfee IIP-M80K-ISAA - Network Security Platform M-8000 Product Manual

McAfee® IntruShield® IPS 4.1
M-8000 Sensor Product Guide
Figure 5: SFP Module
XFP module
The supported XFP module is a robust Small Form Factor Pluggable, operating at
850nm, for up to 10 Gigabits per second on SONET/SDH, Fibre Channel, Gigabit
Ethernet and other applications. This module operates in single mode and multimode.
Additionally, this module transmits on a 850-nanometer wavelength on short reach
(SR), and 1310-nanometer wavelength on long reach (LR).
Figure 6: XFP Module

Installing a module

To install a module with a bail clasp, follow these steps:
1
2
3
4
Remove the module from its protective packaging.
Ensure the module is the correct model for your network.
Locate the label on the module and ensure that the alignment groove is down.
For SFP modules, turn the module so that its label is on top. For XFP
Note:
modules, turn the module so that its label is on bottom.
Grip the sides of the module with your thumb and forefinger and insert module
into the module socket.
Modules are keyed to prevent incorrect insertion.
Using Small-factor Pluggable modules
15
Setting up an M-8000