Toshiba e-studio355 Troubleshooting Manual page 39
Multifunctional digital systems
Hide thumbs
Also See for e-studio355:
- Copying manual (174 pages) ,
- Quick start manual (92 pages) ,
- Service handbook (672 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
5
Turn the green knob on the lower right side clockwise
and then remove the paper jammed at the exit section
of the saddle stitch unit.
6
Close the jam access cover and the front cover of the finisher.
7
Connect the finisher to the equipment.
Move the finisher slowly toward the equipment, placing both of your
hands on the front and the back of the finisher.
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam
37
- Quick Links:
- Clearing a Paper Jam
- Error Codes
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the e-studio355 and is the answer not in the manual?