Toshiba e-studio355 Troubleshooting Manual page 66

1 TROUBLESHOOTING FOR THE HARDWARE
6
After the transparent cover is lifted, remove the empty
staple case.
7
Fit the new staple case into the staple cartridge.
Push the staple case into the cartridge until it clicks.
In this step, do not remove the seal bundling the staples.
8
Push the transparent cover down to its original
position, and pull out the seal bundling the staples.
9
Fit the staple cartridge on the stapler.
Insert the cartridge until it is fixed with a click.
10
Return the stapler unit to the finisher.
64 Refilling With Staples
1
2
1
2