FujiFilm FUJICHROME 64T TYPE II Professional Datasheet

FUJICHROME 64T TYPE
1. FEATURES AND USES
II
FUJICHROME 64T TYPE
ISO 64 speed tungsten-type high image quality color
reversal film. In its speed class, this new film provides
the highest degree of fine grain possible along with
excellent resolving power. It also provides high satura-
tion, rich gradation, faithful color reproduction and well-
controlled gradation balance. These qualities make
RTP II particularly suited to all types of product photog-
raphy, interior and other architectural work, as well as
the reproduction of illustrations, paintings etc.
Features
• Excellent-fine Grain
• Rich Gradation
• Faithful Color
Reproduction
• Improved Reciproc-
ity Characteristics
• Excellent Push/Pull-
Processing Suitabil-
ity
• E-6/CR-56* Process-
ing
64T TYPE II has the same excellent color image stability
as ASTIA 100 and PROVIA 100 films, along with the
same strong resistance against raw film aging.
* CR-56 is Fujifilm's equivalent to the E-6 process.
II
Professional [ RTP ] is an
Results
• Allows large-size enlarg-
ing and other work which
requires finely-detailed
magnified images.
• Provides excellent
gradation continuity and
delicate texture depic-
tion, without any loss in
shadow smoothness.
• Results in faithful repro-
duction of color hues
along with high satura-
tion, delicate tones and
rich gradation.
• Enables long exposures
to be made under low-
light conditions or when
using small diaphragm
openings for increased
depth-of-field. Under
these shooting condi-
tions, any decreases in
film speed and changes
in color balance are
minimal.
• Permits push/pull-
processing, from - / to
1
2
+1 stop, with minimal
changes in color tone
and gradation, providing
ample compensation for
over-/underexposures.
• Can be processed in
standard E-6/CR-56
chemicals anywhere in
the world as with other
FUJICHROME films.
C O L O R R E V E R S A L F I L M S
II
Professional [
2. SPEED
ISO 64/19° Tungsten-type (3100K)
Exposure Time 4 sec.
For the sheet film version of this film, the usable speeds
for exposures under tungsten (3100K) lighting, along
with color correction filter required, if indicated, are
printed on the back of the box. Differences in lighting
equipment and processing conditions may prevent opti-
mum results from being attained. For precise results,
test exposures are recommended.
3. FILM SIZES, EMULSION NUMBER,
BASE MATERIAL AND THICKNESS
Sizes*
135 .......... 36-exp.
35 mm x 30.5 m (100 ft)
Rolls
120
120 .......... 12-exp. (5-roll packs)
4 x 5 in. ........ 10 and 50 sheets
5 x 7 in. ........ 20 sheets
8 x 10 in. ...... 10 sheets
Sheets
11 x 14 in. .... 10 sheets
9 x 12 cm ..... 10 sheets
13 x 18 cm ... 10 sheets
QuickLoad (4 x 5) ....... 20 sheets
* Some sizes are not available in certain market areas.
Base Material .................. Cellulose Triacetate
Base Thickness ............... Rolls 135: 127 µm
4. EXPOSURE GUIDE AND EXPOSURE UN-
DER VARIOUS LIGHT CONDITIONS
This film is designed to render optimum results with
photographic tungsten lighting. If used under different
light sources, the following color compensations are
required.
– 1 –
AF3-024E
RTP II
Emulsion
Number
#701 –
120: 104 µm
Sheets: 205 µm
]