Advertisement
Speaker balance or combination
If you connect loudspeakers to your television,
you can change the speaker combination at
any time.
Press repeatedly to display
SPEAKER on Beo4
Press to select a speaker
combination
Press to remove SPEAKER from
the Beo4 display and return to
the source you were using
Speaker combinations
SPEAKER 1 ... Sound in the
television speakers only.
SPEAKER 2 ... Stereo sound in
the two front speakers.
SPEAKER 3... The television
speakers and the front
speakers are active.
NOTE! For further information about how to
connect speakers to the television, refer to the
chapter 'Socket panel' on page 21 in the
Reference book.
Picture format
Select a picture format to optimise the picture.
Press repeatedly to display
FORMAT on Beo4
LIST
Press if you want to optimise the
SPEAKER
picture, or ...
1 – 3
... press the number of the
desired picture format
EXIT
If you have chosen Format 1 ...
Press
or
to select variations
of this format
If you have chosen Format 1*
or Format 2 ...
Press
or
to move the
picture up and down
Press to leave the FORMAT
function
*Pictures in 4:3 format cannot be
moved up and down.
Picture formats to choose from ...
FORMAT 1 ... For standard TV pictures. Three
LIST
variations are available: 4:3, 15:9 and Panoramic
FORMAT
view (for the largest picture).
FORMAT 2 ... For letter-box pictures. If necessary
GO
move the picture up or down to ensure that
channel names or subtitles – if these appear in
the broadcasted picture – can be seen. In some
1 – 3
cases FORMAT 2 is selected automatically.
FORMAT 3 ... For genuine 16:9 wide-screen
pictures. FORMAT 3 is usually selected
automatically. If this is not the case, you can
select it yourself.
To temporarily remove the picture from the screen,
press LIST repeatedly to display P.MUTE on Beo4,
then press GO. To restore the picture again, press
any source button, such as TV.
EXIT
9
Hide quick links:
Advertisement
