Foxconn Cinema II Deluxe User Manual page 35

PCIe Port #6
Gen2 High Speed Mode
Link ASPM
↑↓←→:Move Enter:Select
► Gen2 High Speed Mode
This item is used to select the Generation II speed mode of PCI Express slots. Select [Auto],
RC will only advertize Generation II capability; Select [Software Initiated], the speed mode is
determined by software initiated; Select [Advertised RC], the speed mode is determined by RC
initiated; Select [Disabled], BIOS will turn off Generation II speed mode of PCI Express slots.
► Link ASPM
This item is used to select the link mode between ASPMs.
!
The item of the PCIe Port #7 / 9 / 10 is the same of the PCIe #6.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PCIe Port #6 Configuration
+/-/:Value
F2/F3:Change Colors
[Auto]
[Disabled]
Enabled Gen2 speed
based HW or SW
support
F10:Save ESC:Exit
F9:Optimized Defaults
28
Help Item
F1:General Help