Fox Intelligent Stepping; Spread Spectrum - Foxconn H61M-S User Manual

► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
► Smart Boot Menu
When PC starts, it will ask you to press [Del] key to enter setup or press [F7] key to enter
smart boot menu. If [Disabled] is selected, then pressing [F7] has no function. This also pre-
vents user without password trying to get into your computer through smart boot menu.

Fox Intelligent Stepping

F-Center

Spread Spectrum

► Spread Spectrum
If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference)
generated by the system, so to comply with FCC regulation. But if overclocking is activated,
you had better disable it.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
[Enabled]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Spread Spectrum Settings
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
26