Onboard Lan Boot Rom; Superio Configuration - Foxconn 45CSX User Manual

OnBoard Configuration
OnBoard Configuration
OnBoard Audio Controller
OnBoard LAN Controller

OnBoard LAN Boot ROM

↑↓←→:Move Enter:Select
► OnBoard Audio Controller
This item is used to enable or disable the onboard audio controller.
► OnBoard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.

SuperIO Configuration

Configure ITE8718 Super IO Chipset
Serial Port1 Address
Serial IRDA Address
IRDA Port Duplex Mode
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
↑↓←→:Move Enter:Select
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
OnBoard Configuration
+/-/:Value
F9:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
SuperIO Configuration
+/-/:Value
F9:Optimized Defaults
[Enabled] [Enabled]
[Enabled]
[Disabled] Enabled
Disabled
F10:Save ESC:Exit
[3F8/IRQ4] Allows BIOS to Select
[3F8/IRQ4]
[2F8/IRQ3] Serial Port1 Base
[Half Duplex] Addresses.
[378]
[Normal]
[IRQ7]
F10:Save ESC:Exit
27
Help Item
Options
F1:General Help
Help Item
F1:General Help