Onboard Lan Boot Rom; Superio Configuration - Foxconn 45CS User Manual

OnBoard Configuration
OnBoard Configuration OnBoard Configuration
OnBoard Audio Controller
OnBoard LAN Controller

OnBoard LAN Boot ROM

OnBoard LAN Boot ROM
↑↓←→:Move Enter:Select
► OnBoard Audio Controller
This item is used to enable or disable the onboard audio controller.
► OnBoard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.

SuperIO Configuration

Configure ITE8��18 Super IO Chipset
Serial Port1 Address
Serial IRDA Address
IRDA Port Duplex Mode IRDA Port Duplex Mode
Parallel Port Address Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
↑↓←→:Move Enter:Select
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
OnBoard Configuration
+/-/:Value
F9:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
SuperIO Configuration
+/-/:Value
F9:Optimized Defaults
[Enabled] [Enabled]
[Enabled]
[Disabled] [Disabled] Enabled
Disabled
F10:Save ESC:Exit
[3F8/IRQ4] Allows BIOS to Select
[3F8/IRQ4]
[2F8/IRQ3] [2F8/IRQ3] Serial Port1 Base Serial Port1 Base Serial Port1 Base
[Half Duplex] Addresses.
[3��8] [3��8] [3��8]
[Normal]
[IRQ��]
F10:Save ESC:Exit
27
Help Item
Options
F1:General Help
Help Item
F1:General Help