Pantech Marauder User Manual page 31

STARTER MODE l BASIC OPERATION
Adding a Wi-Fi network
1
Tap Apps from the Home Screen and tap Settings > Wireless &
network.
2
Tap OFF next to Wi-Fi to activate. The icon turns orange when the
function is on.
3
Tap Wi-Fi.
4
Tap ADD NETWORK.
5 Enter the Network SSID and select the security type among None,
WEP, WPA/WPA2 PSK and 802.1x EAP. Aside from None, you must
enter a password for the network.
6
Tap Save.
Disconnecting a Wi-Fi network
1 Tap Apps from the Home Screen and tap Settings > Wireless &
network.
2 Tap Wi-Fi.
3
Tap the network that is connected to the Marauder
4 Tap Forget to disconnect from the network.
Note You can also disconnect from the Wi-Fi network by pressing
and holding the network and tapping Forget network.
Setting advanced features
1
Tap Apps
network.
2
Tap OFF next to Wi-Fi to activate. The icon turns orange when the
function is on.
3
Tap Wi-Fi.
4
Tap B and tap Advanced.
x
x
x
Setting WPS connection
1
Tap Apps
network.
TM.
2
Tap OFF next to Wi-Fi to activate. The icon turns orange when the
function is on.
3
Tap Wi-Fi.
4 Tap B and tap WPS connection.
x
30
from the Home Screen and tap Settings > Wireless &
Tap Regulatory domain, and select and tap a channel for the
domain.
Tap Keep Wi-Fi on during sleep and specify when the Marauder
should switch from the Wi-Fi network to mobile network.
Tap Avoid poor connections if you do not want to use a Wi-Fi
network that has a poor connection.
from the Home Screen and tap Settings > Wireless &
Tap Button connection or PIN connection, and follow the
instructions.
TM