Pantech Marauder User Manual page 107

STANDARD MODE l CALL & MESSAGES
Receiving visual voicemail
1
Tap Apps from the Home Screen and tap Voicemail
2
Tap the received visual voicemail in the inbox to make it play
automatically.
Tap Phone and enter *86 in the keypad if you have not
x
subscribed to the monthly Visual Voicemail service.
3
Tap Call Back to make a call back to the contact.
4
Tap and hold a contact to see details of the contact and tap View
contact.
Sending visual voicemail
1 Tap Apps from the Home Screen and tap Voicemail
2
Tap and enter the contact number.
3
Tap . You can record a voicemail for up to three minutes.
4 Tap B and tap Urgent or Private, and tap
Note If you have not subscribed to the voicemail service, tap Call
Voicemail and follow the next steps.
Talking through the speaker
1
Tap Speaker during a call. A red bar appears under Speaker when the
function is on.
2 Tap Speaker again to stop using the function.
.
.
.
106
Talking with Bluetooth Technology
1
Connect the Bluetooth device to your phone and make a call.
Bluetooth technology is turned on automatically when the device is
connected.
2 Tap Bluetooth during a call to stop using the function.
Note Refer to the relevant manual of the Bluetooth headset for
more information.
Muting the phone
1
Tap Mute during a call. A red bar appears under Mute when the
function is on.
2
Tap Mute again to turn off the function.
Saving a new contact
1 Tap Phone
from the Home Screen.
2 Enter a telephone number and tap Save in the middle of the screen. If
there is a contact for the number, it appears below.
3 Tap Create new contact.
4 Tap OK to save the contact in your phone only. Otherwise, tap Add
new account and save the contact to other account.
5
Enter additional information as needed for the contact.
6 Tap Save.