Software Update; About Phone; Resetting The Phone - Pantech Burst User Manual

Settings

Software update

Checking for software updates
1. Tap Settings > AT&T software update.
2. Tap Check for updates.
Note If a newer version of software is downloaded, the phone
prompts you whether to start an update now. If you choose to update
the software now, it will restart the handset. If not, you can select to
be reminding in 1 hour, 4 hours, or 8 hours in Options. After selecting
an option, you will be sent back to standby mode.
To resume an update, tap Continue Update.

About phone

You can view the phone information including model
number,android version, baseband version, kernel version, and
build number.
Checking the status of the phone
1. Tap Settings > About phone.
2. Tap Status if you want to check the current status of the
phone, including battery status, battery level, network,
signal strength, mobile network type, service state,
roaming, mobile network state, your phone number, IMEI,
IMEI SV, IP address, Wi-Fi Mac address, Bluetooth address,
serial number, and Up time.
Seeing legal information
1. Tap Settings > About phone.
2. Tap Legal information if you want to see the open source
licenses and Google legal information.

Resetting the phone

You can solve repeated problems by resetting the phone.
Make sure to turn off the phone first to protect information and
software in the phone.
1. Remove the battery cover and battery after turning off the
phone.
2. Insert the battery into the phone right away.
3. Turn on the phone.
86