Installing the Switch
Switch Default Settings
Settings
IP Address
Subnet Mask
Gateway Address
Get community string
Set community string
Trap community string
Port mirroring state
Spanning Tree Protocol
Telnet Access
System Name
Password (Omega)
Download Password
Port Priority
Port Path Cost
Auto-negotiate/Half-Duplex/Full-Duplex
Spanning Tree Priority
Active Aging Time
Hello Time
Transmit Pacing
Bridge Identifier (STP)
Port Priority (STP)
Port Cost (STP)
Store-and-forward or Cut-through (Fragment-free)
Domain Name
Timeout
Default VLAN Name
2-8
Table 2-2 lists the switch default settings.
Table 2-2 Switch Default Settings
Default
0.0.0.0
0.0.0.0
0.0.0.0
public
private
public
Disabled
Disabled
Enabled
None
No password assigned
ATS20
128
100
Auto-negotiate (AT-3726XL, AT-3716XL)
Half-duplex (AT-3714FXL)
32768
300 seconds
2 seconds
Disabled
32768 (bridge priority)
128
100 for 10 Mbps ports
10 for 100 Mbps ports
Store-and-forward
None
utes
5 min
Default VLAN