Scan Led Indicator - Symbol MC9090-G RFID User Manual Supplement

2 - 16 MC9090-G RFID User Guide Suppliment
Bar Code Not Centered in Aiming Pattern
Figure 2-17
Pick List Mode with Multiple Bar Codes in Aiming Pattern
Figure 2-18
Release the trigger.
4.
NOTE Imager decoding usually occurs instantaneously. The mobile computer repeats the steps required to take
a digital picture (image) of a poor or difficult bar code, as long as the trigger remains pulled.
Scanning Tips
Optimal scanning distance varies with bar code density and scanner optics.
Hold the scanner farther away for larger symbols.
•
Move the scanner closer for symbols with bars that are close together.
•
NOTE Scanning procedures depend on the application and mobile computer configuration. An application may
use different scanning procedures from the one listed above.

Scan LED Indicator

The Indicator LED bar on the mobile computer provides a visual indication of the scan status.
Scan LED Indicators
Table 2-6
LED Status
Off
Solid Red
Solid Green
Indication
Not scanning.
Laser enabled, scanning/imaging in process.
Successful decode.