Scan Led Indicator; Resetting Your Terminal; Performing A Soft Reset - Symbol PDT 8000 Product Reference Manual

PDT 8000 Series with Windows
3. Press either the right or left scan trigger. Make sure the red scan beam covers the
entire bar code. The green scan LED lights and a beep sounds to indicate a
successful decode.

Scan LED Indicator

See Parts of the Terminal
Off
Solid Red
Solid Green

Resetting Your Terminal

If the terminal stops responding to input from buttons or the screen, reset it by performing
a soft or hard reset.

Performing a Soft Reset

A soft reset restarts the terminal and saves all stored records and entries. Ensure that your
terminal is awake before performing a soft reset. If necessary, press the Power key to wake
up your terminal.
Files that remain open during a soft reset may not be retained.
2-34
®
Mobile 2003 Software for Pocket PCs Product Reference Guide
Figure 2-20. Scanning with PDT 8056
on page 1-4 for the location of the Scan LED on the terminal.
Table 2-3. Scan LED Indicator
LED Status
Not scanning.
Laser enabled. Scanning in process.
Successful decode.
Caution
Indication