Charging Spare Batteries - Symbol MC9090-G RFID User Manual Supplement

1 - 6 MC9090-G RFID User Guide Suppliment
To charge the main battery:
Ensure the accessory used to charge the main battery is connected to the appropriate power source.
1.
Insert the mobile computer into a cradle or attach the appropriate snap-on module.
2.
The mobile computer starts to charge automatically. The amber charge LED, in the Indicator LED Bar,
3.
lights to indicate the charge status. See
The main battery usually fully charges in less than four hours.
Mobile Computer LED Charge Indicators
Table 1-2
LED
Off
Fast Blinking Amber
Slow Blinking Amber
Solid Amber

Charging Spare Batteries

Use the following three accessories to charge spare batteries:
Single Slot Serial/USB Cradle
•
Four Slot Spare Battery Charger
•
UBC Adapter
•
To charge a spare battery:
Ensure the accessory used to charge the spare battery is connected to the appropriate power source.
1.
Insert the spare battery into the accessory's spare battery charging slot with the charging contacts facing
2.
down (over the charging pins) and gently press down on the battery to ensure proper contact.
The battery starts to charge automatically. The amber charge LED on the accessory lights to show the
3.
charge status.
The spare battery usually fully charges in less than four hours.
Table 1-2
Mobile computer not in cradle or connected to a CAM or MSR. Mobile computer not
placed correctly. Charger is not powered.
Error in charging; check placement of the mobile computer.
Mobile computer is charging.
Charging complete.
for charging indications.
Indication