Using The Power Button; Using A Headset - Symbol MC9090-G RFID User Manual Supplement

Using the Power Button

Press the red Power button to turn the mobile computer screen on and off (suspend mode). The mobile
computer is on when the screen is on and the mobile computer is in suspend mode when the screen is off. For
more information, see
The Power button is also used to reset the mobile computer by performing a warm or cold boot.
On Windows Mobile 5.0
•
-
Warm Boot (Soft Reset) - Resets the mobile computer. Operating system and all applications are
restarted. File storage is preserved.
-
Cold Boot (Hard Reset) - Resets the mobile computer Operating system and all applications are
restarted. File storage is preserved. Real-Time Clock (RTC) is reset. Normally only used when a
Warm Boot does not initiate.
NOTE Applications that are added to the Application folder are not removed when a cold boot is performed. The
Application folder is in flash memory.
For information about booting the mobile computer, see

Using a Headset

Use a stereo headset or a a Bluetooth headset for audio communication when an audio enabled application is
used. To use a headset, plug the headset jack into the audio connector on the side of the mobile computer.
Ensure that the mobile computer volume is set appropriately before putting the headset on. When a headset is
plugged into the jack, the speakerphone is muted. The MC909X User Guide, P/N: 72E-72215-xx provides the
headset support information applicable to the MC9090-G RFID mobile computer
Starting the Mobile Computer on page
Operating the MC9090-G RFID 2 - 13
1-8.
Windows Mobile 5.0 Devices on page 2-18.