Set-Up; Installation - Fujitsu RE25U User Manual

3. S -u
et
A. Installation
Windows ® 2000, XP and Vista:
1. Ensure your computer is turned on.
2. Plug the 2.5" External Hard Drive USB cable into the appropriate open
port on your computer.
3. The "New Hardware Found" message will appear briefly on your
computer screen.
4. Windows 2000, XP and Vista will install the device drivers included with
®
the operating system. No user intervention is required.
®
Macintosh :
1. Ensure your computer is turned on.
2. Plug the 2.5" External Hard Drive USB cable into the appropriate open
port on your computer.
3. The operating system will automatically mount the drive and it will appear
on your computer.
Note: In the rare case that the 2.5" External Hard Drive does not power
up on a single USB connection, the included USB Y-cable may be
required (Pictured above). Simply plug the two Y-cable USB connectors
(black and grey connectors) into the two USB ports on your notebook,
connect the 2.5" External Hard Drive, and the External Hard Drive will
power.
p
USB Y-cable
7