GE TruVision Mini PTZ 12X User Manual page 48

4BChapter 5: Advanced setup
Function
Alarm Action
Preset
Preset Tour
Autopan
Shadow Tour
Relay Action (Dwell Time)
44
Description
Normally Open (NO):
Normally Closed (NC):
Select one of the pre-programmed modes to be executed when
the alarm is triggered (Preset, Preset Tour, Autopan, or Shadow
Tour.) The option listed below will depend on which mode has
been selected.
When an alarm is triggered, there will also be a warning flashed
on-screen. See Figure 12 on page 22.
Select a pre-programmed preset number that the camera should
execute when an alarm contact is triggered.
Select a pre-programmed preset tour number that the camera
should execute when an alarm contact is triggered.
Select a pre-programmed autopan number that the camera
should execute when an alarm contact is triggered.
Select a pre-programmed shadow tour number that the camera
should execute when an alarm contact is triggered.
Set the duration during which the camera will keep the relay
energized when an alarm is triggered. This relay timer starts
counting from the second the alarm is triggered.
Time options are 1 to 127 seconds, OFF, or Always (on) when
alarm occurs.
Alarm In
Alarm In
TruVision Mini PTZ 12X Camera User Manual