Navigating The Menus - GE TruVision Mini PTZ 12X User Manual

Accessing the programming menus
To access the programming menus using a KTD-405/KTD-405-2D keypad
1. Switch the keypad to the camera site you want to program.
2. Press and hold the set key until Enter programming code displays.
3. At the code entry display, enter the programming code 9, 5, 1. Then press the seq
button.
4. At the first menu display, press 3 to select the option Camera.
5. At the Enter camera site number screen, enter the site number of the dome
camera you wish to program. Camera default value is 1. The Main Page 1 menu
appears.
Caution: If the camera times out while you are in a menu and exits the menu system,
all changes are automatically saved.

Navigating the menus

You can use the keypad joystick and keys to navigate through the menu system. See
Figure 14 below and Figure 15 on page 26 for further information on their use.
Figure 14: Menu keys of the KTD-405/405-2D keypad
Shaded keys appear on the KTD-405A/ KTD-405-2DA only
TruVision Mini PTZ 12X Camera User Manual
2BChapter 3: Menu overview
25