Monitor Settings Using The Osd Menu - Fujitsu SCENICVIEW A17-3 Operating Manual

Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the SELECT/MENU button for a few seconds while you switch on the monitor
with the ON/OFF switch.
A message is displayed that the action has been performed.
Please proceed in the same manner to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised changes to the monitor
settings.
► Press and hold both buttons
A message is displayed that the action has been performed.
Please proceed in the same manner to release the locked ON/OFF switch again.

Monitor settings using the OSD menu

With the buttons on the control panel, call up and use the integrated OSD (On-Screen display) menu.
The OSD menu is available in different languages. The English menu names are used in
i
the following description (default setting). With the OSD function Language in the OSD Setup
you can select another language.
To set the OSD menu, perform the following steps:
► Press the SELECT/MENU button to activate the OSD menu.
The main menu appears on the screen (on the left-hand side) with icons for the setting functions.
The corresponding setting window (here: Image Adjust ) is displayed (on the right-hand side).
A26361-K1146-Z120-1-7619, edition 1
and simultaneously for a few seconds.
6 5
The first symbol ( Brightness/Contrast ) is
highlighted. In the right-hand part of the display
the associated functions are shown.
►
►
SCENICVIEW A17-3/A19-3
If necessary, press the
mark another icon (e.g. Image adjust ).
Press the SELECT/MENU button to select
the highlighted icon.
or button to
6 5
17