Changing The Monitor Settings Using The Osd Menu - Fujitsu B22T-7 Pro Operating Manual

Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO

The message ECO Mode on or ECO Mode off is displayed.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
Brightness
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press the
ECO
keep them pressed for a few seconds.

The message Power button locked / unlocked is displayed.
Proceed in the same way to release the locked ON/OFF switch again.

Changing the monitor settings using the OSD menu

With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
The English menu names are used in the following description (default setting).
22
button to switch the ECO operating mode on or off.
6,500 K
reduced
button and the
INPUT
button at the same time and
Fujitsu