Fujitsu SCENICVIEW A17-3 Operating Manual page 27

Adjusting size and position
Calling the Image adjust setting window
H-Position Adjusting the horizontal position
With this function you move the picture to the left or to the right.
Adjusting the vertical position
V-Position
With this function you move the picture up or down.
Setting synchronisation
Clock
With this function you adjust the picture width to eliminate vertical picture
disturbances.
Phase Eliminating picture interference
With this function you fine-tune your monitor to eliminate picture interference.
Adjusting the volume
Calling the Audio setting window
Volume Setting the volume for playback with the integrated loudspeakers
Mute Switching the loudspeakers off or on
Setting colour temperature and colours
Calling the Colour setting window
Selecting the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The colour
temperature is measured in K (= Kelvin). You can select from sRGB , 6500 K ,
9300 K , Native and Custom Colour .
sRGB
Native
Custom Colour
In the user-defined setting you can change the colour ratios of the basic colours
(red, green, blue) as required.
A26361-K1146-Z120-1-7619, edition 1
= setting colour display according to the sRGB standard
= Original colour of the LCD display
= User-defined colours
SCENICVIEW A17-3/A19-3
19