Table of Contents
Advertisement
36
en | Operating instructions
5.5
Live and playback
5.5.1
Live mode
The live mode is the normal operating mode of the unit where live pictures are viewed from
the cameras. From live mode, switch to playback mode or the system menu.
5.5.2
Playback mode
Access to playback functions requires the right user level. Discuss this with your
administrator. To enter playback mode:
1.
2.
–
–
–
–
Press the stop
live viewing.
AM18-Q0605 | v2.0 | 2012.04
To switch the unit from live to playback mode:
–
press the play
key
–
press the forward
playback at 90 seconds before the current time
–
perform a search
–
perform an action from the cameo menu.
In playback mode the video control keys operate as follows:
Press the rewind
key to start reverse playback of recordings. Pressing it again and
again increases the display rate to a maximum before returning it back to normal speed
again. Press the rewind
Press the pause
key to freeze the picture.
Press the forward
key to start playback of recordings. Pressing it again and again
increases the display rate to a maximum before returning it back to normal speed again.
Press the forward
key in the pause mode to step forward one frame at a time.
Press the play
key to resume playback.
key to switch back to live viewing. An alarm also switches the unit back to
Installation and Operation manual
key for instant playback, which will cause the unit to enter
key in the pause mode to step back one frame at a time.
Digital Video Recorder 440/480 Series
Bosch Security Systems
Advertisement
Table of Contents
