Accessing The Webserver - GE ProBridge Ethernet PBe User Manual

Accessing the Webserver

The PBe has a built-in webpage for simple configuration changes
and remote upgrade. To access the webpage do the following:
1. Obtain the IP addresses for the PBe. The default address
are:
• IP Address: 3.112.55.79
• Subnet mask: 255.255.254.0
• Gateway address: 3.112.54.1
2. Connect an Ethernet cable from the Ethernet port on the
PBe to a PC or hub.
3. Launch a WebBroswer program like Microsoft Explorer.
4. Enter the IP address of the PBe in the address bar of the
browser.
5. The Enter Password dialog box will appear. The default
log in and password for the PBe are:
• admin
• admin
6. Click the OK button and the Webpage will display.
23