Table of Contents
Advertisement
1. Remove Power°Mate ® cover as shown in
BELT CHANGING
AND AGITATOR
CLEANING
section°
And Turn
2. Push in and turn
bulb counterclock-
wise, then pull out
to remove_
3. Push in and turn
bulb clockwise,
to
replacer
Bulb must
not be higher than
15 Watts(130
Volts).
4. Reinstall Power-Mate _ cover as shown in
BELT CHANGING
AND AGITATOR
CLEANING
section°
NOTE: See PARTS AND FEATURES
for
Bulb number_
WARNING
Electrical
Shock Or Personal
Injury
Hazard
Disconnect
electrical
supply before
per-
forming
maintenance
to the vacuum
cleaner. Failure to do so could result in
electrical
shock or personal
injury from
vacuum cleaner suddenly
starting.
,
,
,
,,,
,
,
,
,
,
TO CHECK BRUSHES
_L._.._
When brushes
are worn to the
level of the base
support bars,
replace the
agitator
Base Support
Bars
assembly.
TO REPLACE AGITATOR
ASSEMBLY
1. Remove Power-Mate e cover, agitator
cover, belt and agitator assembly.
See "To
Remove Belt" in BELT CHANGING
AND
AGITATOR CLEANING.
2. Replace agitator assembly.
3. Reinstall belt, agitator cover and Power-
Mate _ cover. See "To replace belt" in BELT
CHANGING
AND AGITATOR CLEANING
18
Advertisement
Table of Contents
