e Settings
You can specify 4 settings of the "One Touch Operation Buttons", the
Wake On Timer, Power Management and Settings.
One Touch Operation Button Setting
Three one touch operation buttons (
keyboard. Pressing each of these buttons starts up the application pre-
registered to that button. You can register the desired application to
each of the one touch operation buttons.
You can display a list of Windows standard files by pressing the
Reference button, and select the desired application and then register
it to each of the one touch operation buttons. If you do not register an
application to the buttons, leave the textbox vacant. In this case, the
applications do not start up even if you press the button.
The registered default for "
"battery status display", and for "P1" "screen inverted display software".
Wake On Timer Setting
You can specify the way to restore from the Sleep Mode by putting the
check mark
In the Suspend Mode (the Standby Mode or the Hibernation Mode),
this unit can be restored from the mode when the day and time you set
comes.
" is "touch panel calibration", for "P0"
in the check box.
, P0, P1) are located on the
3
125