Table of Contents
Advertisement
To delete a library
• Make sure that the library you are deleting is not the active library.
If it is, change the active library.
1. On the Libraries Window, select the library you want to delete from
the list of libraries.
2. Tap the Delete button (
).
Properties
This menu option displays a dialog box for setting the properties of
smARTwriter. The Properties dialog box contains the following tabs.
General
This tab contains settings for customizing smARTwriter behavior.
2
Timeout
Sets the time smARTwriter waits from the moment you lift the pen from
the screen before it begins recognition of the "ink" pattern. The range
is from 0.1 to 1.5 seconds.
Enhanced recognition of English
Checking this box enables the smARTwriter linguistic layer, which
allows smARTwriter to recognize rules and guidelines for the English
language. For example, if the "g" in "reading" is written very similar to
a "y," the linguistic layer knows that "iny" is not a common ending in
English and that "ing" is a more probable combination. Therefore,
smARTwriter outputs "reading" as the recognized word.
Enhanced Recognition of English is checked by default. You should
disable this option if you are not writing standard or plain English text.
Space after recognition
When this option is checked, smARTwriter adds a space after each
set of characters recognized (after each timeout).
Enable Sounds
When this option is checked, smARTwriter plays error and warning
sounds through the FIVA's speaker.
81
Advertisement
Table of Contents
