Pulling Out The Stylus; Connecting The Ac Adapter - Casio CASSIOPEIA FIVA MPC-701 Series User Manual

Pulling out the Stylus

Use your finger to slide the stylus from its
storage slot on the front of the FIVA unit.
To replace the stylus, slide it carefully
back into the slot so the raised part of
the stylus enters the slit.
• Take care to avoid misplacing the stylus.
• Take care to avoid damaging or breaking the tip of the stylus.
• Keep the tip of the stylus and the FIVA screen clean and free of
dirt. Performing stylus operations when the stylus or screen is
dirty can damage the screen.

Connecting the AC Adapter

Connect the AC adapter to FIVA as shown in the illustration below.
To prevent unnecessary consumption of electrical power, do not
leave the AC adapter plugged into the power outlet when it is not
connected to FIVA.
1. Connect one end of the power cord into the AC adapter. (q).
Connect the other end into the power outlet (w).
2. Firmly connect the AC adapter plug as far as possible into the AC
adapter port (
Use only the dedicated AC adapter, model no. AD-
S60160A-E. Use of another type of AC adapter
creates the danger of fire caused by smoking or
ignition.
e
) on the side of the FIVA unit (e).
q
w
1
31