Connecting To The Lan Port - Casio CASSIOPEIA FIVA MPC-701 Series User Manual

To connect microphone
Connect the microphone plug to the microphone port ( ) on the right of
this unit.
Use a microphone which has the monaural mini jack (ø3.5 mm).
Connect the microphone plug to the microphone port ( ).
To disconnect the plug, pull it out from the port by holding the plug.

Connecting to the LAN port

By using the LAN port, you can connect to the standard Ethernet
(10Base-T/100Base-TX). An Ethernet cable is necessary when
connecting to the Ethernet. After connecting, setting the software is
necessary in order to connect to the network using the TCP/IP function.
1. Connect one end of the Ethernet cable to the LAN port on the left
side of the unit and the other end to the network.
Only an Ethernet cable can be connected to the LAN port. Other
cables cannot be connected.
Connecting other cables (e.g. modular cable for telephone use) by
mistake to the LAN port may break the LAN port connector or cause
malfunction.
2. After connecting, perform the setting of the software to use the
Ethernet.
Ethernet cable
3
101