Using The Car Mounted-Type Battery Charger (Ha-H35Chg; General Guide - Casio IT-800 Series User Manual

Using the Car Mounted-type Battery Charger (HA-H35CHG)

The optionally available Car Mounted-type Battery Charger (HA-H35CHG) can be
used to charge the battery installed in the Handheld Terminal using power from the
cigarette lighter in your car.

General Guide

Top
4
1 Car Adaptor Jack
2 Removal Buttons
3 Terminal Detect
Switch
4 Power Terminals
5 Power Indicator
LED
6 Mount Hooks
Before the use of this charger for battery pack installed in WWAN models, see the
battery charge instruction on page E-22.
Front
2
Connect the Car Power Cable (bundled) here.
Press when removing the IT-800.
This switch detects when the IT-800 is mounted correctly on the
charger.
Power is supplied to the IT-800 via these contacts.
This LED indicates the power status and the mountting status of
the IT-800.
Off: IT-800 is not installed
Green: Power on, IT-800 mounted correctly
These hooks are used to stabilize the Handheld Terminal when
mounting it on the Car Mounted-type Battery Charger.
Right
3
6
2
5
2
1
E-57