Specifi Cations - Casio IT-800 Series User Manual

Important !
Never short out the power contacts of the Cradle-type Battery Charger. This
can damage the Cradle-type Battery Charger.
Allowing the power contacts become wet can cause an electric shock or fi re. In
addition, if the contacts become soiled, contact may be impaired resulting in
poor charging. For reasons of safety and maintaining charging battery pack(s)
in optimum condition, clean the power contacts by wiping with a dry cloth or
cotton swab after disconnecting the AC adaptor.
When placing the IT-800 into the cradle, make sure that it is seated properly
and that the power LED at the front of the Cradle-type Battery Charger is lit in
green. Charging and communication will not proceed properly if the Handheld
Terminal is not seated properly.
Specifi cations
1. Charging Specifi cations
Charging Method:
Charge Period:
2. Power Supply
Power Source:
Consumption Current:
Output to Handheld Terminal: 9.5V DC 2.7A (max.)
3. AC Adaptor
Model:
Input:
Output:
4. Dimensions and Weight
Dimensions:
Weight:
5. Operating Environment
Temperature:
Humidity:
The AD-S15050 series comes available in the following models depending on area or region
where you are in.
Model no. of AC Adaptor
AD-S15050BE
AD-S15050B-N
AD-S15050BE-CN
E-56
Constant current/voltage (the charging circuit is built in IT-800)
Approximately 4 hours (battery pack)
Approximately 7 hours (large-capacity battery pack)
AC adaptor (AD-S15050B*)
12V DC 2.6A
AD-S15050B
100V to 240V AC 50/60Hz 0.4A
5V DC 3.0A
Approximately 116(W) 111.5(D) 83.5(H) mm
(4 "W 4 "D 3 "H)
Approximately 260g (9.2oz)
0°C to 40°C (32°F to 104°F)
10% to 90% RH (non-condensation)
Area/Region
All except China
China only
Compliance
Compliant with CE,
UL, FCC, and Energy
Effi ciency Standards.
Compliant with Energy
Effi ciency Standards and
CCC.