Stereo / Mono Output Sound; Muting The Output Sound - Bosch PLE-SDT Installation And Operation Manual

26 en | Operation
8.3.7

Stereo / mono output sound

To switch between stereo and mono audio output sound (output 29) of the FM tuner:
1.
2.
NOTICE!
Sometimes a stereo FM radio frequency produce unwanted output noise. In that case, get a
good public antenna connection or set the FM tuner in the mono mode.
8.3.8

Muting the output sound

To mute the audio output sound (output: 29) of the FM tuner:
1.
2.
PLE-SDT_OM | V1.0 | 2012.02
Press the button ST/MONO (37) of the remote control:
– The LCD (16) upper line will show "STEREO" when stereo is set or "MONO" when
mono is set.
Press the button ST/MONO (37) again to switch between mono and stereo.
Press the button (4) of the remote control:
– The LCD lower line will show MUTE flashing continuously when the mute function is
activated.
To reactivate the sound, press the button
Installation and Operation manual
Plena Easy Line SD Tuner BGM source
(4) once again.
Bosch Security Systems B.V.