Manual Selection Of A Fm Radio Frequency; Radio Data System (Rds); Switch Off Timer - Bosch PLE-SDT Installation And Operation Manual

Plena Easy Line SD Tuner BGM source
8.3.4

Manual selection of a FM radio frequency

1.
Examples:
FM frequency
87.50 MHz
108.00 MHz
NOTICE!
Entering a non existing FM radio frequency will result in the LCD message: ERROR, result in a
time out and return to the default radio frequency screen.
8.3.5

Radio Data System (RDS)

The Radio Data System button RDS (35) of the remote control is used to display FM radio
frequency information, if it is broadcasted (for example; the time, radio station and or
programme information):
1.
2.
3.
8.3.6

Switch off timer

1.
2.
Bosch Security Systems B.V.
Press the button FREQ (36) of the remote control, followed by its 4 or 5 number FM
radio frequency digit, with the numerical buttons (17).
– The FM radio frequency is set/activated after about two seconds.
– The FM radio frequency range can be set between: 87.50 MHz and 108.00 MHz.
Press the buttons
FREQ + 8 + 7 + 5 + 0
FREQ + 1 + 0 + 8 + 0 + 0
Select the FM tuner source with the remote control button USB/SD/-TUNER (39).
– The green LED TUNER (12) will light up.
Press the button RDS (35).
– The lower line of the LCD (16) will show the FM radio frequency broadcast
information, If available.
Press the button RDS (35) again to switch off the RDS function, if required.
Press the button SLEEP (40) of the remote control to automatically switch off the FM
tuner by the build-in timer function. The LCD (16) upper line shows "SLEEP" if the switch
off timer is set between 90-10 minutes.
The switch off timer can be set between: Off, 90-10 minutes:
– Basic setting: Switch off timer off.
– 1st actuation of button: Sets the switch off timer to 90 minutes.
– 2nd actuation of button: Sets the switch off timer to 80 minutes.
– 3th actuation of button: Sets the switch off timer to 70 minutes.
– 4th actuation of button: Sets the switch off timer to 60 minutes.
– 5th actuation of button: Sets the switch off timer to 50 minutes.
– 6th actuation of button: Sets the switch off timer to 40 minutes.
– 7th actuation of button: Sets the switch off timer to 30 minutes.
– 8th actuation of button: Sets the switch off timer to 20 minutes.
– 9th actuation of button: Sets the switch off timer to 10 minutes.
– 10th actuation of button: Return to basic setting.
To change the switch off setting, press the button SLEEP (40) of the remote control
again.
Installation and Operation manual
Operation | en 25
PLE-SDT_OM | V1.0 | 2012.02