Bosch PLE-SDT Installation And Operation Manual page 12

12 en | System Overview
Number Function Button
39 USB/SD, USB/SD-TUNER
TUNER
40 TUNER SLEEP
35 TUNER RDS
43 TUNER SEARCH
37 TUNER ST/MONO
19, 22 TUNER |< - TUNE - >|
6 USB/SD |< - SKIP - >|
10 USB/SD >||
8 USB/SD
4 USB/SD,
TUNER
13, 14 USB/SD USB-SD
41 USB/SD, -
TUNER
PLE-SDT_OM | V1.0 | 2012.02
Description
To select USB/SD or FM tuner operation.
Refer to Section 8.1 Remote control.
To set the FM tuner switch-off timer.
Refer to Section 8.3.6 Switch off timer.
Radio Data System. To display FM radio frequency information.
Refer to Section 8.3.5 Radio Data System (RDS).
To search for a radio frequency.
Refer to Section 8.3.1 Search a FM radio frequency.
To switch between stereo or mono audio output signal.
Refer to Section 8.3.7 Stereo / mono output sound.
Every time you press one of the buttons the tuning frequency goes up or
down with 50 kHz. Press for two seconds to scan up to the next station.
Refer to Section 8.3 FM tuner.
For track selection and fast forward/reverse.
Refer to Section 8.2.2 Track selection.
To switch between track replay and pause.
Refer to Section 8.2 USB/SD source.
To stop the track replay. Refer to Section 8.2 USB/SD source.
To mute the audio output level of USB / SD source or FM Tuner.
Refer to Section 8.2.5 Muting the output sound of the USB/SD.
Refer to Section 8.3.8 Muting the output sound of the FM Tuner.
To select USB device or SD card operation.
Refer to Section 8.2 USB/SD source.
IR transmitter lens. Refer to Section 8.1 Remote control.
Installation and Operation manual
Plena Easy Line SD Tuner BGM source
Bosch Security Systems B.V.