To Adjust Program Schedules - Honeywell PRO TH4000 Series Operating Manual

To adjust program schedules

Press SET 3 times, then adjust time.
Press SET, then set desired temperature.
Set To
75
Set Schedule
6 : 30
AM
Heat
Wake
MonTueWedThuFri
Set To
75
Set Schedule
6 : 30
AM
Heat
Wake
MonTueWedThuFri
1. Press SET until Set Schedule is displayed.
s t
2. Press or
time (Mon-Fri), then press SET.
s t
3. Press or
time period, then press SET.
4. Set time and temperature for the next time
period (Leave). Repeat steps 2 and 3 for each
weekday time period.
5. Press SET to set weekend time periods (Sat-
Sun), then press RUN to save & exit.
Note: Make sure the thermostat is set to the system
you want to program (Heat or Cool).
Note: To cancel an unwanted time period (except
Wake), press and hold
while in the Set Schedule mode.

PRO TH40D / TH420D
to set your weekday Wake
to set the temperature for this
s
+ HOLD for 4 seconds