To Adjust Program Schedules - Honeywell resideo TH6320U2008 User Manual

Program Schedule
You can program four time periods each day, with different settings for weekdays
and weekends. We recommend the pre-sets (shown in the table below), since they
can reduce your heating/cooling expenses.
Wake - Set to the time you wake up and the
temperature you want during the morning, until
you leave for the day.
Away - Set to the time you leave home and the
temperature you want while you are away (usually
an energy-saving level).
Home - Set to the time you return home and the
temperature you want during the evening, until
bedtime.
Sleep - Set to the time you go to bed and the
temperature you want overnight (usually an
energy-saving level).
NOTE: To temporarily or permanently override any of the above program
schedules, see page 4.

To adjust program schedules

1 Press Menu on your thermostat.
2 PROG is displayed. Press Select. Then ON
is displayed. (If you do not want to use a
schedule, press
Select.) Press Select.
3 Press or
edit. Press Select.
4 Press or
edit (Wake, Away, Home, and Sleep). Press
Select.
5 ON is displayed. Press Select to keep the
schedule period on. Or press
to turn off the schedule period.
6 Time starts blinking. Press
the schedule period start time. Press Select.
7 Temperature starts blinking. Press
to adjust the "Heat" setpoint temperature.
Press Select. Press
temperature setpoint. Press Select.
8 Repeat steps 4 through 7 for the remaining
schedule periods.
Press Home when you're finished to save and
9
return to the home screen.
10 Schedule can be adjusted and turned ON or
OFF by returning to Menu and following the
steps provided above.
or to display OFF. Press
to select day or set of days to
to select a schedule period to
or
or to adjust the "Cool"
and then Select
to adjust
or
3
Heat
70 °
Wake
(6:00 am)
°
62
Away
(8:00 am)
70 °
Home
(6:00 pm)
62 °
Sleep
(10:00 pm)
Cool
78 °
°
85
78 °
82 °