Add Third Party To Conference; View Conference Participants; Remove Conference Participants - Cisco 8831 User Manual

Add third party to conference

As the conference host, you can remove individual participants from the conference. You can also view a list
of participants.
The conference ends when all the participants hang up.
Add third party to conference
Before You Begin
Before you can add a party to the conference, you must be on an active call and not on hold.
Procedure
Step 1 Press Conf.
Step 2 Enter the phone number, fast-dial code, or speed-dial number for the party you want to add.
If you have several held calls, you can press Calls to display a caller list and add a caller to the conference.
Step 3 After the new party answers, press Conf.
The conference begins.
Step 4
(Optional) Repeat these steps to add more parties, if desired.

View conference participants

Procedure
While in a conference, press ConfList to view a list of the last 16 participants who have joined the conference.
The maximum number of participants that can be displayed is 16. If there are more than 16 participants, only
the most recent 16 participants to join display.

Remove conference participants

Procedure
Step 1 While in a conference, press ConfList to view a list of participants.
Step 2 Highlight the participant that you want to remove and then press Remove.
Note
Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0
46
Only the most recent 16 conference participants
display.
Calling features